0
HEIRESS

HEIRESS

£189.00

* PLEASE NOTE - These pedals are made in batches so dispatch and delivery times may vary depending on stock at the time of your order. When you place an order I will contact you via email with a postage ETA or a production estimate for the next batch (Usually 2-3 Weeks: Component Depending) *

Built out of love of the sound and simplicity of a classic Two Transistor FF, HEIRESS expands on this topology and brings in more controls to dial in each separate stage of the circuit. The result? A massively versatile FUZZ that allows you to adapt your tone for every set up. Powered by 2x BC183 silicon transistors, a switchable MP10B germanium transistor and variable component values: HEIRESS is a versatile device able to go from glassy cleans, to ripping velcro, to that classic sound that paved a way for new genres. Your tone is in there somewhere!

- Handmade in Brighton, England; With a fully analog signal path engaged through a true-bypass circuit -

HEIRESS Features 7 Controls to help you dial in your destruction to the closest frequency:

FREQ : A wide set tone control: Sweeping from warm and wooly when fully counter clockwise, to rip and tear when fully clockwise

NOISE : Sets the amount of gain being pushed from the circuit. From a touch of drive when fully counter-clockwise, to absolute destruction when fully engaged.

SIL/GER SWITCH : Swaps between Silicon and Germanium Transistors: Switch “DOWN” for a more “Modern” sounding fuzz, or “UP” for more “Vintage” inspired.

  • SILICON : BC183
  • GERMANIUM : MP10B

LEVEL : Sets the overall output volume

BASS CUT : Removes low end rumble for a more “Cut Through” tone

  • - : Bass Cut
  • + : Regular Bass Frequency

LOAD : Controls the amount of power being pushed into the input stage: Resulting in more gain and a more “Open” sound.

*This control can react differently depending on the input signal, and will shut off if pushed past its limit*

VOLTS : Sets the amount of current that gets fed into the circuit; ranging from full power to gradually draining to simulate a dying battery, giving spitty and broken tones.

*This control can react differently depending on the input signal, and will shut off if pushed past its limit*

Current draw : 100mA

Enclosure Dimensions :

  • Length : 120mm
  • Width : 94mm
  • Height : 42mm